Forum: EasyBoot
Topic: runcommand ERD2007 by EasyBoot
started by: momancow
Posted by momancow on Jul. 27 2009,12:58
Hi all,

I've read EsayBoot history post "How to Boot ERD2007"
I do Step by Step,but i get "File setupped.sys could not be loaded.The error cod 18"

Below is my step
I get a new folder "ERD7" in EasyBoot\disk 1
I copy Win51, win51is, win51is.sp1 in EasyBoot\disk1
I use UltraISO open ERD2007 CD and copy all files in folder "ERD7"
I rename bootsec.bin to erd7.bin and replace all I386 and i386 >ERD7
setupldr.bin replace all I386 and i386 >ERD7 and 74 03 >EB 1A
Not change anything inside txtsetup.sif
Use command run /erd7/erd7.bin in menu

I've test ERD2007 CD is work,but use in EasyBoot get error
Am I do something wrong?Has anybody could advice me how to do ?

Sorry for my poor english and hope all of you can understand what i say.

Thanks!!!!!!

momancow
Posted by balder on Jul. 27 2009,14:57
@momancow

You can’t hex edit files used in erd7 because files (setupldr.bin) gets corrupted if you don’t (as first step) patch file (setupldr.bin).

Test this:

1. Copy folder i386 and “tag files” (Win51, win51is, win51is.sp1) from ERD2007 CD to EasyBoot\disk1
2. Extract bootsec.bin from ERD2007 CD to folder EasyBoot\disk1\ezboot
3. Rename bootsec.bin to erd7.bin and create command in EasyBoot: run erd7.bin

If you still want to change name to folder i386 read < here > (post 9 especially)

balder
Posted by momancow on Jul. 31 2009,15:17
@balder

I'm sorry that I've delayed so long.

Thanks for your help,my problem solved.

Thank you very much!!!!!!

My english not good,I only can say "Thank You".Thank you very much again!!!

momancow