Forum: EasyBoot
Topic: paragon partition manager 9.0 express
started by: madar

Posted by madar on May 17 2009,18:59
I have made bootable paragon partition manager 9.0 Express
as below:
1. copy contents of iso to ...\EasyBoot\disk1
2.find isolinux.bin from web and put it in ...\EasyBoot\disk1 too
3.use one of commands below:
bcdw /isolinux.bin /vmlinuzp noapic initrd=/initrd.gz root=/dev/ram0 eng_ver vga=0x314

or
bcdw /isolinux.bin /vmlinuzp noapic initrd=/initrd.gz root=/dev/ram0 eng_ver splash=silent vga=0x314


the difference of commands are:
by first command you will see process of runing command in menu
by second you will not see processing commands



Posted by mahdi on May 26 2009,05:18
Thanks a lot  madar
this is the only tutor that works
i have searched hundreds of web pages,this is the first
one ,easy and understandable

i saw your sign (shirin zaban),are you tutorial writter in
booland?
i think so
any way thanks a lot

Posted by Mega_num on May 28 2009,08:47
Thankssssssssssssssssssssss a lot
Posted by AhrimanSefid on Nov. 14 2009,05:02
Hi.
Thank You Work but No't Active Mouse.
Plz Help For Active Mouse.
Thank you.

Posted by madar on Nov. 14 2009,08:58
AhrimanSefid

I Keep all my tutors here and other sites and also save all files i make
for tutors.

After seeing your note,i checked the iso by vmware 7,test was ok and i can
use mouse

Note:I do not know why but i have bootable cd's that are working perfectly
in my computer and a lot of other computers,but in some computers i have
the problem for using mouse.
i could not find out why in some computers we can not use mouse

Last Note:where are you from,your name shows farsi language,are you iranian? If yes i am iranian too



Posted by looknguide on Feb. 25 2010,06:07

(madar @ May 17 2009,23:59)
QUOTE
I have made bootable paragon partition manager 9.0 Express
as below:
1. copy contents of iso to ...\EasyBoot\disk1
2.find isolinux.bin from web and put it in ...\EasyBoot\disk1 too
3.use one of commands below:
bcdw /isolinux.bin /vmlinuzp noapic initrd=/initrd.gz root=/dev/ram0 eng_ver vga=0x314

or
bcdw /isolinux.bin /vmlinuzp noapic initrd=/initrd.gz root=/dev/ram0 eng_ver splash=silent vga=0x314


the difference of commands are:
by first command you will see process of runing command in menu
by second you will not see processing commands

my friend

i have follow ur instruction to put paragon partition manager n also put isolinux.bin fine there, every thing file but it doesn't show my ATA drive with NTFS partition in partition manager.

is this linux boot only n only work with ext2 or ext3

hopping further guide
thanks

Posted by madar on Feb. 25 2010,12:58
Dear looknguide

As I know,for using this version of paragon ,you should have at least two adjacent partitions.And they should be the same,i mean that they both should be both primary or both logical in the same hard disk.

So if you do not have two logical partitions (or two primary partitons) in your system,or if you try it by virtual machin like wmvare that does not have specification that said above,it will not do any thing and will not show any partition.

Any way i like to work by partition magic for partition jobs.

Posted by looknguide on Feb. 25 2010,19:38
i got 40 gb hdd with one 10 gb primary and rest logical partition, is paragon partition magic work on this in easycd
Posted by madar on Feb. 26 2010,02:41
Dear looknguide

For example your primary is C: and you have just one primary partition,
Now if you have at least two logical partitions (in this example D: & E:)
you can use this version of paragon.
But if you do not have at least two logical partitions (or at least two primary
partitions),you can not use that.

This version of paragon just resizes two adjacent partitions.