EZB Forum » Printable Version of Topic

Forum: EasyBoot
Topic: MiniXP
started by: Behdadsoft

Posted by Behdadsoft on May 18 2010,03:22

Hello balder and Thanks for Your Helps.

I Create Hiren's BootCD 10.4 and Good working All Software , But I have a problem With MiniXP in run it.
MiniXP Only Complete run in MobaLiveCD_v2.1 But on the system crashes and blue window stays on a few I've tested the system and all had the same problem.

Please Guide Me.

THANKS A LOT

Posted by balder on May 18 2010,06:16

@Behdadsoft

Quote: “MiniXP Only Complete run in MobaLiveCD_v2.1”

Please, I need more information how you build this ISO (what you checked in EasyBoot when creating ISO-file) and what menu command you use to launch Hiren and - further more - the folder structure in EasyBoot\disk1

Note: I’m away from computer a couple of days – so you have to wait for next reply :;):

Regards balder

Posted by Behdadsoft on May 22 2010,03:46

when I run Hiren's Boot in Vmware or Burn Image File , Minixp don't run and show this Error.

Posted by balder on May 22 2010,04:26

@Behdadsoft

Quote: “Minixp don't run and show this Error”
Yes I can see. But you didn’t answer my initial questions

1. Do you launch Hiren from an ISO created in EasyBoot – and if so – in what way do you launch Hiren (what commands etcetera)

2. Did you use my script “easyboot-iso.script” and the separate button for integrating Hiren to EasyBoot?

However the code “07FF” could be an indication for troubles with amount of RAM

Regards balder

Posted by Behdadsoft on May 22 2010,05:07

I Extract Hiren's Boot (HBCD) Folder in EasyBoot\disk1 . I read < THIS >Post and Work All Other programs are working well and the only problem remaining is MiniXp .I use command :memdisk hiren.img and My system has 4 GB of RAM and the amount of RAM I have a problem.

Posted by balder on May 22 2010,14:29

@Behdadsoft

Quote: “Minixp don't run and show this Error”

I just followed tutorial as given in post nr: 55 < HERE >

And everything works fine – but not if I test created ISO in “Microsoft Virtual PC”

Instead I use this “Virtual PC” (MobaLiveCD_v2.1.exe) from < HERE >

Unfortunately I cannot “pin-point” to what causes you problem at this stage

I really cannot understand why this doesn’t work for you

Note: When you run MobaLiveCD_v2.1.exe – you don’t need to create “hard disk image” - as this is only a test of a “Live-system”

Take attention to that "qemu" is a slow tester - seems dead during test - but is working!

Regards balder

Posted by Evandson on May 22 2010,22:42

Hello Balder, okay brother?

Here I am again with another problem asking for your help, is happening to me the same friend above did the normal DVD with WINDOWS XP / 7 and Hiren's Boot, but everything is working perfect over the MINI XP does not work is presented the same problem friend up "Behdadsoft", the rest of the functions of Hiren's Boot, fuciona normal. I even tested on actual PC recorded a DVD and tested at the machine, and presented the same problem

I thank you and I await answers.

A big hug is with God!

Posted by balder on May 23 2010,07:26

To
@Behdadsoft and @Evandson

I tested burn ISO to a CD-RW and run Hiren on several different computers without problem :cool:

Note: I reduced write speed when burning CD-RW to half (4x) to make sure it wasn’t “screwed up” – and then it works okay.

As I cannot produce these problems of yours - I guess you have to stick to the “old solution” regarding Hiren :;):

Note: unfortunately - you lose some parts of Hiren original options this way

To integrate Hiren 10.4 (DOS-tools) to EasyBoot
1. Extract folder Hbcd from Hiren-ISO to EasyBoot\disk1
2. Use menu command line in EasyBoot: memdisk /hbcd/boot.gz
3. To Run Mini XP. Use menu command line in Easyboot: bcdw /hbcd/xp.bin

Note: You don't need o check "Allow lower case" when creating ISO!

Regards balder

Posted by Behdadsoft on May 24 2010,05:50

OK . Thanks balder

There is only one problem and that the order of "memdisk /hbcd/boot.gz"
does not work with this recipe.
But Work This command line in EasyBoot : bcdw /ezboot/hiren.img

Posted by balder on May 24 2010,06:23

@Behdadsoft

Quote: “"memdisk /hbcd/boot.gz"
does not work with this recipe”

I can guarantee you that it works :cool:

Why it doesn’t work for you I don’t know

Anyway… As it seems that your problems are partly solved – I guess we for the moment can leave this “academic discussion” :;):

Regards balder

Posted by Evandson on May 24 2010,09:53

Balder Brother okay?

Balder, first want to thank you for your attention is giving everyone here the forum, thanks for the help.

See the only problem I was having and friend Behdadsoft recounted above, solve the following way will there is a tip for anyone having the same problem:

I changed the command "memdisk hiren.img" menu command to "run hiren.img"

Ready after changing the MiniXP could start passing the error screen that was showing, but sugiu another problem.

At the time of presenting the desktop with start menu and icons on the desktop, the pc hangs and freezes on the wallpaper without displaying the start menu and icons can not even restart the pc I have to reset, which will be What's happening this time face if you can help me I am grateful.

I thank you and await response.

A big hug brother is with God!

Posted by balder on May 24 2010,12:00

@Evandson

Please understand the differences between this two menu options in EasyBoot:

To integrate Hiren 10.4 (DOS-tools) to EasyBoot
1. Extract folder Hbcd from Hiren-ISO to EasyBoot\disk1
2. Use menu command line in EasyBoot: memdisk /hbcd/boot.gz <-- this command launch only DOS-tools in Hiren
3. To Run Mini XP. Use menu command line in Easyboot: bcdw /hbcd/xp.bin <-- this command launch only MiniXP in Hiren

But this command: “run hiren.img” launch the grub-based menu in Hiren.
Please test using: bcdw /hbcd/xp.bin in EasyBoot to launch MiniXP :;):

Note: EasyBoot built-in command “bcdw” is a very realible command to use. I call it; “super-relaible” command.
So if MiniXP still fail – there is not much I can do – as I’m unable to “produce” this problem of yours

Regards balder

Posted by Evandson on May 25 2010,18:41

(balder @ May 24 2010,17:00)

QUOTE

Regards balder

Thanks brother worked, thanks again.

A big hug is with God