Topic: Problem with boot
started by: pawelek
Posted by pawelek on Mar. 06 2012,06:29
Can't boot code error 4Hirens and win 98 is ok but xp dont boot say error code 4
Posted by balder on Mar. 06 2012,07:03
@pawelekQuote: "xp dont boot say error code 4"
Could you please explain how you implemented WinXP to Easyboot and which checkboxes you checked when creating ISO in Easyboot
And further more - when do you get this 'error code4' after the first reboot or what
Note: error code 4 is in 'normal case' a typical indication to a hardware problem
But can also be a problem related to how your build in EasyBoot is designed by your self
balder
Posted by pawelek on Mar. 06 2012,07:09
I vahe 2 version first version is iso i want only change hirens del old version and add new 15.1 and not work
second version i build in easyboot but not owrk
Posted by balder on Mar. 06 2012,07:16
@pawelekQuote: "change hirens del old version and add new 15.1 and not work"
Sorry I'm confused here...
Is it setup of WinXP you mean or is it problem run 'minixp' in Hiren you mean - I don't get it...
Please explain what you have done a little bit better - have you mixed and old Hiren with a new hiren - or what have you done here
balder
Posted by pawelek on Mar. 06 2012,07:20
No hirens minixp Normal xp installation
Posted by balder on Mar. 06 2012,07:30
@pawelekQuote: "No hirens minixp - Normal xp installation "
Hiren and setup of WinXP has nothing common at all
To integrate WinXP in EasyBoot do as follows:
1. Copy (or extract from ISO-file) everything to folder disk1
2. Use menu command in Easyboot menu: run W2KSECT.BIN
Note: Look in folder EZBOOT that you do have a file W2KSECT.BIN - it should be there
If not, you have to extract 'BOOT-file' from ISO-file to folder EZBOOT and use that file instead of W2KSECT.BIN.
3. When creating ISO in Easyboot, only check 'Joliet'
As told - Hiren is a separate thing and have no influence to WinXP
Another thing... How did you test this build - did you use 'Virtual PC' or similar test system
balder
Posted by pawelek on Mar. 06 2012,07:37
Thx i try this method I use 'Virtual PC'
Posted by pawelek on Mar. 06 2012,07:46
Still not work
Posted by balder on Mar. 06 2012,08:01
@pawelekQuote: "Still not work"
How much memory have you dedicated to 'Virtual PC' (you are recommended to set 256 MB RAM in Virtual PC)
Test created ISO with this tool < HERE >
Note: you don't need to create 'Virtual Hard Disk Image' when program asks
balder
Posted by pawelek on Mar. 06 2012,08:09
mobalivecd work but virtual pc not work
Posted by balder on Mar. 06 2012,08:15
@pawelekQuote: "mobalivecd work but virtual pc not work"
As expected - I already wrote in post nr; 2 - quote: "indication to a hardware problem"
Your build is working correctly
Note: if integrating Hiren and you run MiniXP in Hiren, you are recommended to use 512 MB RAM as MiniXP is loaded and run totally from RAM
Basically this issue you have in this case is a 'hardware problem' most likely related to your motherboard - that is why I recommend different test methods and not to forget - burn to CD-RW to do the 'real test'
From my point of view, you have a working solution - continue and integrating more stuff to you build @pawelek
Keep it up...
balder
Posted by pawelek on Mar. 06 2012,08:47
Not work :I must start a new version
Posted by balder on Mar. 06 2012,09:09
@pawelekQuote: "I must start a new version"
I don't understand what you mean with 'new version'
Anyway... A good start point could be to reinstall EasyBoot (which refresh all files in folder Easyboot)
Then start with integrating WinXP using my tutorial in post nr; 6
Note: you cannot be sure build is working correctly when testing in 'virtual environment' - sometimes you need to test in 'reality' (burn to CD-RW)
balder